Rubber-Backed & PVC Backed
Do's: Turn matting over and run beater bar, dry vacuum on back side of matting. Can be hosed off as needed to remove heavy soil. A high-pressure hose can be used (should not exceed 500 psi) and hot water (max 120°F) to rid the mats of oils. Lay the mat on a flat surface to dry. The mat may be scrubbed using a brush with a low foaming general purpose cleaner. Clean the floor surface under the mat to prevent debris from attaching to the mat and causing a tripping hazard.
Do Not: Use steam, bleach, degreasers containing butyl, or caustic chemicals. Do not machine wash or mechanically scrub the mats. Not following the care instructions will void the product warranty and shorten the life span of the product. Rubber-backed mats must never be stored or placed on-end. This will cause the edges to curl causing an unsafe area and will void the warranty.
Needle-Punched Broadloom
Do's: Vacuumed, spot cleaned with mild detergent, or professionally cleaned.
Automotive Mats
Do's: Remove mat from vehicle, shake debris off mat, and vacuum. For stains, spot clean with mild detergent.
Do Not: Use bleach or any silicone spray’s like Armor-All, these will damage and cause a slippery surface on the mat which can result in a hazard and void the warranty.